Electron Beamed Elastomeric Cables |
|
Siechem 125 & Siechem 155 Electron beam cross linked cables for various applications listed below:
|
| Siechem 125, flexible single core cable |
Siechem 125, flexible single core cable from 0.25 sq. mm to 630.mm2 as per IEC 60228 Class 5, 600/1100 Voltage rated, conductor as per IEC 60228 Class 5, temperature range -40 to +125 C, Short Circuit overload up to + 280o C (IEC 60092), Very high resistance to heat, oil, pressure, hydrolysis and weathering, flame retardant, electron beam cross linked, soldering iron resistant, easy to strip, flexible as per relevant VDE / IEC / BS Standards. RoHS compliant as per Euro Norms.
Application: Public buildings, shopping malls, powerstations, shipbuilding, power stations, sensor leads, solenoid valves, control panels, signal systems, hospitals etc
|
| |
| Siechem 125 Multi Core Cables |
Similar to Siechem 125 flexible single core electron beamed cable. Cross section from 0.5 to 6 mm2 Voltage range: 600/1100. (0.5 – 1 mm2: 450/750V). No. of Cores: 61 Cores. Intermediate layer is with woven glass tape. Meets IEC 60332-3-24 Cat. C and IEC 60332-1. |
| |
| Siechem 125 Multi Core, Cable Screened cables |
Similar to Siechem 125 Multi core electron beamed cables, but with intermediate layer as EMC screening. Cross section range from 0.5 to 6 mm2. 600/1100 V rated. (0.5 to 1 mm2 : 450/750 V rated)
|
| Siechem 125 RW, reduced wall thickness cable |
Siechem 125 RW, reduced wall thickness cable, similar to electron beam cross linked Siechem 125 but also with halogen free, low smoke, low toxic, high current carrying capacity cables. Voltage range: 300/600 V. 0.25 to 300 mm2 as per IEC 60228 Class 5.
|
| Siechem 125 Marine cables |
Siechem 125 Marine cables, similar to the above type of cables and designed according to IEC 60092-353. This marine cable meets IEC 60332-3-22 Cat. A and IEC 60332-1. Conductor cross section from 0.75 to 300 mm2.
Application: Shipbuilding, electric systems, signal, control panels, sensor leads, solenoid values, electromagnets etc.
|
| Siechem 155 Eco-F, (Eco Friendly) Single Core Cable |
|
Similar to Siechem 125 RW, but with Eco friendly special properties. Cross section range from 0.25 to 16 mm2 as per IEC 60228 Class 5, Tin plated copper. Voltage: 400/750 rating. Short circuit rating + 250 o C.
Application: Where operating temperature requirement requires -40 to + 155°C. Tested for 2500 Hours at 155 oC for very high electrical & mechanical integrity.
|
| |
Siechem 155 Single Core (Class F) cables
|
Similar to 155 Eco-F cables, but for -55 to +155°C operating temperature, electron beam cross linked. Voltage rating 600/1100V with short circuit overload to +280 oC.
Compatible to insulating varnishes & impregnation resins. Range 0.25 to 300 mm2 as per IEC 60228 Class 5. Very high resistance to heat, pressure, oils, chemicals, hydrolysis and weathering, flame retardant, easy to strip, soldering iron resistant & flexible.
Application: Transformers, coil winding, motors, pumps, magnets, relays & electric systems etc.
|
| |
Siechem 155 Multi Core cables.
|
Similar to Siechem 155 Single core cables, but with multi core, 0.25 to 2.5 mm2 conductor as per IEC 60228 Class 5, 600/1000 V rated. (0.25 to 1 mm2 : 450/750 V rated) No. of Cores: 2 to 6 or as per customer requirement.
|
| |
| Siechem 155 Multi Core Screened cables |
Similar to Siechem 155 Multi core cables but with EMC screening as intermediate layer. Cross section range: 0.5 to 6 mm. |
|
|
|
|